-
The 2-pcs press-on hinge closure suits a 29-28/21 glass neck finish. The pourer is equipped with tear-off seal for reliable tamper evidence assuring the integrity of the product. A marguerite flow regulator supports controlled pouring. A non-drip pouring lip avoids dripping of product after pouring....
Compare -
This 1-piece PE-made hinge closure is weight optimized and suitable for GME 30.32 (PET 26/21) push-on neck finishes. A frontal tab ensures tamper evidence with no-loose parts, which avoids litter. The integrated dropless pouring lip stands for pouring convenience and a safe and clean re-closing...
Compare -
Compare
The 2-pc press-on hinge closure suits a 26/21 PET neck finish. The pourer is equipped with tear-off seal for reliable tamper evidence assuring the integrity of the product. After opening, the hinged lid can be opened up to 180 degrees, a marguerite supports good pouring...
-
This 2-piece PE-made hinge closure is weight optimized and suitable for GME 30.32 (PET 26/21) push-on neck finishes. The hinged overcap contains a tear-off tamper evidence band to ensure originality. An insert with dropless pouring lip enables maximized flow, pouring convenience as well as safe...
Compare -
The 1-pc press-on closure suits a 26/21 PET neck finish. The closure is equipped with an integrated hinge. A tear-off band assures tamper evidence.
Compare -
The 1-pcs press-on hinge closure suits a 29/21 glass, PE or PET neck finish. The pourer is equipped with ring-pull tear-off seal for reliable tamper evidence. The opening is designed like a triangle, which supports a defined 2-flow pouring for smaller and larger volumes. A...
Compare -
The 2-pcs press-on screw closure suits a 29/21 glass, PE or PET neck finish. The pourer is equipped with ring-pull tear-off seal for reliable tamper evidence. The orifice is designed with a small outlet and a big outlet, which allows 2 different dosing alternatives in...
Compare -
The 2-pcs screw closure system fits a 60mm orifice of a plastic pail and is equipped with a weld-on adapter ring for a PP lid and a directly welded vent. The integrated pull-up spout is furnished with a screw cap, designed with a bore seal...
Compare -
The weight-optimized screw closure is suitable for plastic containers / canisters with a 55mm DIN neck finish. A ratchet band provides superior tamper evidence and brakes reliably with first opening. The closure is equipped with an EPE washer for safe sealing.
Compare -
Aluminum roll-on closure with pourer. It is intended for cold filling of still, non-alcoholic and alcoholic drinks, especially edible oil. Customizable with brand designs and colors, top and side printing and hot foiling.
Compare -
Aluminum roll-on closure with pourer. It is intended for cold filling of still, non-alcoholic and alcoholic drinks, especially edible oil. Customizable with brand designs and colors, top and side printing and hot foiling.
Compare -
Aluminum roll-on closure with pourer. It is intended for cold filling of still, non-alcoholic and alcoholic drinks, especially edible oil. Customizable with brand designs and colors, top and side printing and hot foiling.
Compare -
Aluminum roll-on closure with pourer. It is suitable for cold filling of edible oil but also still, non-alcoholic and alcoholic drinks. Customizable with brand designs and colours.
Compare -
With that PE made handle it is easy to carry bigger container. The handle fits on 36mm PET neck finish.
Compare -
With that PE made handle it is easy to carry bigger container. The handle fits on 48mm PET neck finish and is suitable for full automatic application.
Compare -
With that PE made handle it is easy to carry bigger container. The handle fits on 38mm PET neck finish.
Compare -
The 2-pc press-on closure suits a 42/34 PET neck finish. The pourer is equipped with tear-off seal for reliable tamper evidence assuring the integrity of the product. A marguerite flow regulator supports controlled pouring and the non-drip pouring lip avoids dripping of product after pouring....
Compare -
The PE-made Press-on closure with hinged overcap is fitting on a 33-400 plastic container neck and offers a 1,5 mm pouring hole (ideal eg for soy sauce). Various liner versions (Tri-Tap, Top-Tab, etc) are available for PET bottles.
Compare -
The 1-pc press-on closure suits a 32/27 Double Clip PET neck finish. The closure is equipped with an integrated hinge. A tear-off band assures tamper evidence. Double clip necks are predominantly used in Asia.
Compare -
The 2-pcs press-on screw closure suits a 32/27 PET neck finish. The pourer is equipped with ring-pull tear-off seal for reliable tamper evidence. The round opening is designed with a marguerite flow control, which supports a good product flow. A non-drip pouring lip avoids dripping...
Compare -
The 2-pc press-on closure suits a 36/23 PET or glass neck finish. The pourer is equipped with tear-off seal for reliable tamper evidence assuring the integrity of the product. A marguerite flow regulator supports controlled pouring. A non-drip pouring lip avoids dripping of product after...
Compare -
The 2-pcs press-on hinge closure suits a 32/27 mm PET neck finish. For first opening a tear-off band needs to be opened. The pourer is equipped with tear-off seal as second reliable tamper evidence assuring the integrity of the product. A marguerite flow regulator supports...
Compare -
The 2-pcs press-on closure suits a 29/21 PET neck finish. The closure is equipped with an integrated hinge. A tear-off band, assuring tamper evidence, can be opened in two directions and thus is of advantage for both right and left handed consumers. The rounded shape...
Compare -
The 2-pcs press-on closure suits a 26/21 PET neck finish. The overcap is equipped with tear-off band for reliable tamper evidence assuring the integrity of the product and an integrated hinge to re-close the closure easily. The insert serves as flow regulator and a non-drip...
Compare -
The 2-pcs press-on hinge closure suits a 29/21 glass and PET neck finish. The pourer is equipped with tear-off seal for reliable tamper evidence assuring the integrity of the product. A marguerite flow regulator supports controlled pouring. A non-drip pouring lip avoids dripping of product...
Compare -
The 1-pc press-on closure suits a 26/21 PET neck finish. The closure is equipped with an integrated hinge. A tear-off band assures tamper evidence.
Compare -
The 1-pc press-on hinge closure suits a 26/21 PET neck finish. The pourer is equipped with tear-off seal for reliable tamper evidence assuring the integrity of the product. After opening, the hinged lid can be opened up to 180 degrees, a marguerite support good pouring...
Compare -
The 1-pc press-on hinge closure suits a 29/32 glass neck finish. The pourer is equipped with tear-off seal for reliable tamper evidence assuring the integrity of the product. After opening, the hinged lid can be opened up to 180 degrees and a non-drip pouring lip...
Compare -
The 1-pc press-on hinge closure suits a 29/32 glass neck finish. The pourer is equipped with tear-off seal for reliable tamper evidence assuring the integrity of the product. After opening, the hinged lid can be opened up to 180 degrees and a non-drip pouring lip...
Compare -
The 2-pcs press-on screw closure suits a 29/21 glass, PE or PET neck finish. The pourer is equipped with ring-pull tear-off seal for reliable tamper evidence. The orifice is designed with a small outlet and a big outlet, which allows 2 different dosing alternatives in...
Compare -
The 2-pcs PE made push-on closure fits on a PCO 1881 PET neck finish. The pourer part is equipped a tear-off membrane to assure the integrity of the product. After opening the pouring will be controlled by a marguerite flow regulator. The non-drip function of...
Compare -
The 2-pcs press-on screw closure suits a 29/21 glass, PE or PET neck finish. The pourer is equipped with ring-pull tear-off seal for reliable tamper evidence. The orifice is designed with a small outlet and a big outlet, which allows 2 different dosing alternatives in...
Compare -
The 2-pcs press-on screw closure suits a 29/21 glass, PE or PET neck finish. The pourer is equipped with ring-pull tear-off seal for reliable tamper evidence. The opening is designed like a triangle, which supports a good product flow. A non-drip pouring lip avoids dripping...
Compare -
The 2-pcs press-on screw closure suits a 29/21 glass, PE or PET neck finish. The pourer is equipped with tear-off seal for reliable tamper evidence and a flow regulator for controlled pouring. A non-drip pouring lip avoids dripping of product after pouring. The screw closure...
Compare -
The 2-pcs screw closure system suits a 60mm orifice of a plastic pail and is equipped with a weld-on adapter ring for a PP lid. The integrated pull-up spout is furnished with a screw cap, designed with a bore seal for save sealing. Breaking its...
Compare
