-
The 2-pcs press-on screw closure suits a 29/21 glass, PE or PET neck finish. The pourer is equipped with tear-off seal for reliable tamper evidence and a flow regulator for controlled pouring. A non-drip pouring lip avoids dripping of product after pouring. The screw closure...
Compare -
The 2-pcs press-on screw closure suits a 26/21 PET neck finish. The pourer is equipped with tear-off seal for reliable tamper evidence and a flow regulator for controlled pouring. A non-drip pouring lip avoids dripping of product after pouring. The screw closure is designed as...
Compare -
The 2-pcs PE made push-on closure fits on a PCO 1881 PET neck finish. The pourer part is equipped a tear-off membrane to assure the integrity of the product. After opening the pouring will be controlled by a marguerite flow regulator. The non-drip function of...
Compare -
The 2-pcs press-on screw closure suits a 29/21 glass, PE or PET neck finish. The pourer is equipped with ring-pull tear-off seal for reliable tamper evidence. The orifice is designed with a small outlet and a big outlet, which allows 2 different dosing alternatives in...
Compare -
The 2-pcs press-on screw closure suits a 29/21 glass, PE or PET neck finish. The pourer is equipped with ring-pull tear-off seal for reliable tamper evidence. The orifice is designed with a small outlet and a big outlet, which allows 2 different dosing alternatives in...
Compare -
The 2-pcs press-on screw closure suits a 29/21 glass, PE or PET neck finish. The pourer is equipped with ring-pull tear-off seal for reliable tamper evidence. The opening is designed like a triangle, which supports a good product flow. A non-drip pouring lip avoids dripping...
Compare -
The 2-pcs press-on screw closure suits a 32/27 PET neck finish. The pourer is equipped with ring-pull tear-off seal for reliable tamper evidence. The round opening is designed with a marguerite flow control, which supports a good product flow. A non-drip pouring lip avoids dripping...
Compare -
The 2-pcs press-on screw closure suits a 29/21 PET neck finish. The pourer is equipped with tear-off seal for reliable tamper evidence and a newly designed flow regulator controls pouring: the 2-Flow closure, has an innovative oil flow control system, which allows less or more...
Compare -
The 2-pc press-on closure suits a 32/26 PET neck finish. The pourer is equipped with tear-off seal for reliable tamper evidence assuring the integrity of the product. A non-drip pouring lip avoids dripping of product after pouring. The screw closure is designed as multi-threat version...
Compare -
The PP-made snap-on closure with hinged overcap is fitting on a 25/25 (25 snap-on) plastic container neck and offers a round pouring hole featured with a TPE valve for controlled and well dosed pouring. The valve can be offered in different shore hardness and cut...
Compare -
The 1-pc press-on hinge closure suits a 26/21 PET neck finish. The pourer is equipped with tear-off seal for reliable tamper evidence assuring the integrity of the product. After opening, the hinged lid can be opened up to 180 degrees, a marguerite support good pouring...
Compare -
The one-piece hinge closure fits a PET bottle with PCO 1881 neck - it is pressed on-to the threaded PCO 1881 neck. Due to a non-slit interbead band the closure cannot be taken from the bottles without destroying it and furthermore a tear-off membrane secures...
Compare -
The 1-pc press-on hinge closure suits a 29/21 PET neck or adaquate glass neck. The pourer is equipped with tear-off seal for reliable tamper evidence assuring the integrity of the product. After opening, the hinged lid can be opened up to 180 degrees and a...
Compare -
The PP-made snap-on closure with hinged overcap is fitting on a 29/25 (29 snap-on) plastic container neck and offers a round pouring hole featured with a TPE valve for controlled and well dosed pouring. The valve can be offered in different shore hardness and cut...
Compare -
The PP-made snap-on closure with hinged overcap is fitting on a 29/25 (29 snap-on) plastic container neck and offers a round pouring hole featured with a TPE valve for controlled and well dosed pouring. The valve can be offered in different shore hardness and cut...
Compare -
The 1-pc press-on hinged closure suits a 29/21 glass, PE or PET neck finish. The closure is equipped with tear-off seal for reliable tamper evidence and a marguerite flow regulator for controlled pouring. A non-drip pouring lip avoids dripping of product after pouring.
Compare -
The PP-made Push-on closure with hinged overcap, with an opening angle of 180 °, is fitting on a BPF 28 neck or 28 mm PET neck. The off-centred 5 mm pouring hole is designed with a specific pouring lip to avoid residual product , when...
Compare -
The PP-made screw closure with hinged overcap is fitting on a 33-400 plastic container neck and has a 6mm diameter pouring hole.
Compare -
The PP-made screw closure with hinged overcap is fitting on a 33-400 plastic container neck and offers a round pouring hole featured with a TPE valve for controlled and well dosed pouring. The valve can be offered in different shore hardness’s and cut sizes to...
Compare -
The PP-made screw closure with hinged overcap is fitting a 32mm neck finish of a HDPE or PET bottle and offers a round 4mm pouring hole in the centre.
Compare -
The PP-made screw closure with hinged overcap is fitting on a 38-SP400 plastic container neck and offers a round 6 mm pouring hole for pouring. Tri-Tap IHS liner suitable for PET bottles. Various other liner versions (Tri-Tap, Top-Tab, etc) are available for PET, HDPE or...
Compare -
The PP-made screw closure with hinged overcap is fitting on a 38-400 PET container neck and offers a round pouring hole featured with a TPE valve for controlled and well dosed pouring. The valve can be offered in different shore hardnesss and cut sizes to...
Compare -
The PP-made screw closure with hinged overcap is fitting on a 38-400 plastic container neck and offers a round pouring hole featured with a TPE valve for controlled and well dosed pouring. The valve can be offered in different shore hardness’s and cut sizes to...
Compare -
The PP-made screw closure with hinged overcap is fitting on a 38-400 plastic container neck and offers a round 6 mm pouring hole for pouring. Various liner versions (Tri-Tap, Top-Tab, etc) are available for PET, HDPE or PP bottles.
Compare -
The PP-made screw closure with hinged overcap is fitting on a 38-400 plastic container neck and offers a round pouring hole featured with a TPE valve for controlled and well dosed pouring. The valve can be offered in different shore hardness’s and cut sizes to...
Compare -
The screw closure is suitable for plastic container with a 63mm neck finish. A slit flex band provides superior tamper evidence and brakes reliable with first opening. The closure is equipped with a EPE liner for safe sealing.
Compare
