-
The 1-pc DoubleSeal ClipAside Tethered Cap, PE made, with bore seal and an outer sealing lip, provides a tight seal for PET one-way bottles with PET 38 2-start (GME 30.29) neck finish with an eWall thickness of 2,3 mm, suitable for hotfilling. The ClipAside slit...
Compare -
The 1-pc BERICAP DoubleSeal screw closure, made of HDPE, and equipped with an inner and outside sealing lip, providing a superior tight seal for PET one-way bottles with 33mm 2-start neck finish. The ClipAside slit flexband provides 2 functions: a) product integrity: breaks reliably after...
Compare -
This 1-piece PE-made hinge closure is weight optimized and suitable for GME 30.32 (PET 26/21) push-on neck finishes. A frontal tab ensures tamper evidence with no-loose parts, which avoids litter. The integrated dropless pouring lip stands for pouring convenience and a safe and clean re-closing...
Compare -
This 2-piece PE-made hinge closure is weight optimized and suitable for GME 30.32 (PET 26/21) push-on neck finishes. The hinged overcap contains a tear-off tamper evidence band to ensure originality. An insert with dropless pouring lip enables maximized flow, pouring convenience as well as safe...
Compare -
The weight optimized screw closure is suitable for plastic container with a 63mm neck finish. A slit flex band provides superior tamper evidence and brakes reliably with the first opening. The closure is equipped with an IHS liner for safe sealing. The closure has a...
Compare -
This Special 63 mm closure including valve is part of the Closed Transfer System, BERICAP SecuraLink™, which prevents personal exposure to chemicals when dispensing from the container into production apparatus. The Securalink™ system will dispense a minimum of 2.5 gallons(10L) within 20 seconds(H20) Measured dispensing...
Compare -
The 2-pcs thumb up sports closure fits onto a PCO 1881 neck finish. The monomaterial HDPE design enhances recyclability. The overcap is secured with an outer tamper evident ring. The lower part becomes visible in windows indicating the opening. The overcap has a 180° hinge...
Compare -
The 2-piece sportscap fits PET 26 CSD GME 30.40 bottles. Its mono-material design in HDPE enhances the recyclability. The opening angle of 180° ensures hazard-free drinking. An outer TE ring is clearly visible in small windows after 1st opening. Monet is available is equipped with...
Compare -
The 1-pcs thumb up sports closure fits onto a PET 26 GME 30.40 neck finish. The monomaterial HDPE design enhances recyclability. The overcap is secured with a dropping tamper evident element avoiding littering and has a 180° hinge for convenient drinking. Ideal for "on-the-go products"...
Compare -
The 1-piece sportscap fits PET 26/22 CSD (GME 30.40) PET bottles. Its mono-material design in HDPE enhances the recyclability. The opening angle of 180° ensures hazard-free drinking. A dropping TE element is clearly visible after 1st opening. BIarritz is equipped with a ClipAside tethered TE...
Compare -
The 1-pcs thumb up sports closure fits onto a PET 38 2-start neck finish. The monomaterial HDPE design enhances recyclability. The overcap is secured with a dropping tamper evident element avoiding littering and has a 180° hinge for convenient drinking. Ideal for "on-the-go products" or...
Compare -
The 1-pcs thumb up sports closure fits onto a PET 38 3-start neck finish. The monomaterial HDPE design enhances recyclability. The overcap is secured with a dropping tamper evident element avoiding littering and has a 180° hinge for convenient drinking. Ideal for "on-the-go products" or...
Compare -
The 1-pcs thumb up sports closure fits onto a PET 33 mm, 2-start neck finish. The monomaterial HDPE design enhances recyclability. The overcap is secured with a dropping tamper evident element avoiding littering and has a 180° hinge for convenient drinking. Ideal for "on-the-go products"...
Compare -
The 1-pcs thumb up sports closure fits onto a PCO 1881 neck finish. The monomaterial HDPE design enhances recyclability. The overcap is secured with a dropping tamper evident element avoiding littering and has a 180° hinge for convenient drinking. Ideal for "on-the-go products" or during...
Compare -
The 1-pc ClipAside tethered closure with 120 knurls is equipped with an olive bore seal and provides a tight seal for PET one-way bottles with PET 26/22 CSD GME 30.40 neck finish. The ClipAside tethered slit flexband supports an easy and efficient application, assures the...
Compare -
The 3-pcs closure fitment is post-applied on beverage cartons with a 23mm pre-punched hole orifice. The fitment is equipped with a spout and a screw cap, which includes a tamper evidence band with 2 functions: a) product integrity: breaks reliably during first opening b) the...
Compare -
Aluminum roll-on closure with Saranex or EVOH liner for application on BVP 28 H neck. It is intended for cold filling of still, non-alcoholic and alcoholic drinks, especially wine. Customizable with brand designs and colours, top and side printing and hot foiling.
Compare -
Aluminum roll-on closure for application on BVS 30 H neck. Saranex, EVOH, SaranTin or Alkovin Active liner available. It is intended for cold filling of still, non-alcoholic and alcoholic drinks, especially wine. Customizable with brand designs and colours, top and side printing and hot foiling.
Compare -
Aluminum roll-on closure with compound for application on BVS 30 H neck. It is intended for cold filling or hot filling of still or carbonized non-alcoholic and alcoholic drinks , especially wine. Customizable with brand designs and colours, top and side printing and hot foiling.
Compare -
Aluminum roll-on closure with Saraex or EVOH liner for application on BVP 25 S neck. It is intended for cold filling of still, non-alcoholic and alcoholic drinks, especially wine. Customizable with brand designs and colours.
Compare -
Aluminum roll-on closure with Saranex or EVOH liner for application on BVP 25 H neck. It is intended for cold filling of still, non-alcoholic and alcoholic drinks, especially wine. Customizable with brand designs and colours.
Compare -
Aluminum roll-on closure with EPE liner for application on BVP 31,5 H neck. It is intended for cold filling of still, non-alcoholic and alcoholic drinks, especially liquor. Customizable with brand designs and colours, top and side printing and hot foiling.
Compare -
Aluminum roll-on closure with EPE liner or NRF for application on BVP 31 ,5 H neck. It is intended for cold filling of still, non-alcoholic and alcoholic drinks, especially liquor. Customizable with brand designs and colours, top and side printing and hot foiling.
Compare -
Aluminum roll-on closure with EPE liner or NRF for application on BVP 31 ,5 H neck. It is intended for cold filling of still, non-alcoholic and alcoholic drinks, especially liquor. Customizable with brand designs and colours, top and side printing and hot foiling.
Compare -
Aluminum roll-on closure with EPE liner or NRF for application on BVP 31 ,5 H neck. It is intended for cold filling of still, non-alcoholic and alcoholic drinks, especially liquor. Customizable with brand designs and colours, top and side printing and hot foiling.
Compare -
Aluminum roll-on closure with EPE liner for application on BVP 28 H neck. It is intended for cold filling of still, non-alcoholic and alcoholic drinks, especially liquor. Customizable with brand designs and colours, top and side printing
Compare -
Aluminum roll-on closure with EPE liner for application on BVP 28 H neck. It is intended for cold filling of still, non-alcoholic and alcoholic beverages. Customizable with brand designs and colours, top and side printing and hot foiling
Compare -
Aluminum roll-on closure with EPE liner for application on BVP 28 S neck. It is intended for cold filling of still, non-alcoholic and alcoholic beverages. Customizable with brand designs and colours, top and side printing and hot foiling.
Compare -
Aluminum roll-on closure PP31,5x24 D with EPE liner for application on BVP 31,5 H neck. It is intended for cold filling of still, non-alcoholic and alcoholic drinks, especially liquors. Customizable with brand designs and colours.
Compare -
Aluminum closure with EPE liner for application on BVP 28 S neck. It is intended for cold filling of still, non-alcoholic and alcoholic drinks, especially liquor. Customizable with brand designs and colours, top and side printing and hot foiling.
Compare
