-
The closure fitting is suitable for tin plate container with a 24mm piercing. The base part is designed with a cylindrical insertion edge and is equipped with a tear-off seal granting a secure tamper evidence function. The screw cap is featured with a bore seal...
Compare -
The closure fitting is suitable for tin plate container with a 27mm piercing. The base part is designed with an cylindrical insertion edge and is equipped with a tear-off seal granting a secure tamper evidence function. The screw cap is featured with a bore seal...
Compare -
2-pcs 180° opening hinge closure (PP made) screwed on a pourer part (LDPE made), which fits to a 27mm piercing of a metal container. Transparent colours offer a superb appearance. The easy to open tear-off membrane secures the integrity of the product before the first...
Compare -
This press-on closure for 5 gallon water container, with bi- injected seal has a non-spill valve function.
Compare -
The 2-pcs Thumb'Up sports closure fits onto a 38mm 3-start PET neck finish. The PE made pourer is equipped with a bore seal and a molded tamper evidence band is assuring the integrity of the product. The PP made overcap is secured with a tear-off...
Compare -
The 2-pcs Thumb'Up sports closure fits onto a 30/25 PET neck finish. The PE made pourer is equipped with a bore seal and a molded tamper evidence band is assuring the integrity of the product. The PP made overcap is secured with a tear-off tamper...
Compare -
The 2-pcs Thumb'Up sports closure fits onto a 29/25 PET neck finish. The PE made pourer is equipped with a bore seal and a molded tamper evidence band is assuring the integrity of the product. The PP made overcap is secured with a tear-off tamper...
Compare -
The 2-pcs Thumb'Up sports closure fits onto a PCO 1881 PET neck finish. The PE made pourer is equipped with a bore seal and a molded tamper evidence band is assuring the integrity of the product. The PP made overcap is secured with a tear-off...
Compare -
The 1-piece dispensing cap is design for one-hand use - one hand opening, pushing the trigger and pouring. The specific design device closes the opening again after the trigger is released. Tamper evidence function and protection of the integrity of the product is achieved with...
Compare -
The TAP BeriFlow 60 is a 3-pcs tap, made of PE, HDPE and LDPE parts, which can be screwed onto a blow molded container using a 60mm neck finish. The EPE washer grants safe tightness. The tab enables a fast and safe decanting of fluids...
Compare -
The TAP BeriFlow 55 is a 3-pcs tap, made of PE, HDPE and LDPE parts, which can be screwed onto a blow molded container using a 55mm neck finish. The EPE washer grants safe tightness. The tab enables a fast and safe decanting of fluids...
Compare -
The TAP BeriFlow 45 is a 3-pcs tap, made of PE, HDPE and LDPE parts, which can be screwed onto a blow molded container using a 45mm neck finish. The EPE washer grants safe tightness. The tab enables a fast and safe decanting of fluids...
Compare -
The 2-pcs closure is fitting onto PET bottles with a 1-start 48mm neck finish. The lower pourer part is secured with a tamper evidence band and the upper spout part (water Tap) is secured with a tear-off band - both proving the integrity of the...
Compare -
The 1-pc, PE made screw closure is equipped with an olive bore seal and provides a tight seal for 48mm 3-start PET neck finish. The center of the closure is designed with an opening recess, closed with a pre-cut membrane, which breaks easily once the...
Compare -
The 1-pc screw closure, PE made, designed with a bore seal, provides a tight seal for PET one-way bottles with 38mm 2-start neck finish. The closure is designed with a interbead tamper evidence band, assuring the integrity of the product breaking reliable with first opening.
Compare -
The 1-pc screw closure, PE made, with bore seal and an outer sealing lip, provides a tight seal for PET one-way bottles with 38mm 2-start neck finish. The slit tamper evidence band is assuring the integrity of the product and breaks reliable after first opening.
Compare -
The 1-pc screw closure, PE made, with bore seal and an outer sealing lip, provides a tight seal for PET one-way bottles with 38mm 2-start hot fill neck finish. The slit tamper evidence band is assuring the integrity of the product and breaks reliable after...
Compare -
The 1-pc screw closure, PE made, is suitable for PET one-way bottles with 38mm 3-start neck finish. The slit tamper evidence band is assuring the integrity of the product and breaks reliable after first opening. The closure is used for conduction heat seal bottles, providing...
Compare -
The 1-pc screw closure with 90 knurls, PE made, is suitable for PET one-way bottles with 38mm 3-start neck finish. The slit flexband is assuring the integrity of the product and breaks reliable after first opening. Secure tightness is achieved with an EPE liner.
Compare -
The 1-piece screw closure, PE made with an outer sealing lip and with an inside with long sealing conus for ATE function, provides a tight seal for PET one-way bottles with 38mm 3-start neck finish. The slit flexband is assuring the integrity of the product...
Compare -
The 1-pc screw closure, PE made, with olive bore seal and an outer sealing lip, provides a tight seal for PET one-way bottles with 38mm 3-start neck finish. The slit tamper evidence band is assuring the integrity of the product and breaks reliable after first...
Compare -
The screw closure is fitting onto a 31,5mm glass, PET or PE neck finish. The tamper evidence band breaks reliable after first opening. The closure is equipped with a EPE PVDC liner for safe sealing.
Compare -
The 3-pcs screw cap consists of a the threaded closure plus an inserted tamper evidence band and a plug being the final closing part for the bottled product. The closure is suitable for 27 mm glass neck finish.
Compare -
The 2-pc press-on closure suits a 29-28/21 glass neck finish. The pourer is equipped with tear-off seal for reliable tamper evidence assuring the integrity of the product. Furthermore a tear-off tamper band, which can be torn away from left and right side offere a second...
Compare -
The 3-pcs PushPull sports closure "Next Generation" fits onto a 38mm 3-start PET neck and fulfils the needs of bottlers and consumers: the PE made pourer is equipped with a bore seal and a molded tamper evidence band is assuring the integrity of the product....
Compare -
The 3-pcs PushPull sports closure "Next Generation" fits onto a 38mm 2-start PET neck and fulfils the needs of bottlers and consumers: the PE made pourer is equipped with a bore seal and a molded tamper evidence band is assuring the integrity of the product....
Compare -
The 3-pcs PushPull sports closure "Next Generation" fits onto a 28mm PCO 1810 PET neck and fulfils the needs of bottlers and consumers: the PE made pourer is equipped with a bore seal and a molded tamper evidence band is assuring the integrity of the...
Compare -
The 3-pcs PushPull sports closure for non-carbonated beverages, designed for aseptic filling is suitable for 28mm (PCO 1881) 2-start thread neck. The PE made pourer is equipped with a bore seal and a molded tamper evidence band is assuring the integrity of the product. The...
Compare -
The 3-pcs PushPull sports closure fits onto to a PCO 1881 PET neck finish. The PE made pourer is equipped with a bore seal and a molded tamper evidence band is assuring the integrity of the product. The PE made shutter is easy to pull-up...
Compare -
The 1-pc screw closure with 72 knurls is equipped with an olive bore seal and provides a tight seal for PET one-way bottles with 30/25 neck finish. The slit flexband support an easy and efficient application, assures the integrity of the product and breaks reliable...
Compare -
The 2-pcs PE made push-on closure fits on a 29mm PET or glass neck finish. The pourer part is equipped a tear-off membrane to assure the integrity of the product. After opening the pouring will be controlled by a marguerite flow regulator. The non-drip function...
Compare -
The 2-pcs screw closure, made of PP, is suitable for non-refillable (one-way) bottles with a 28mm BPF or PCO 1810 neck finish. The free rotation liner cares for good sealing. A molded tamper evidence band (pig tail version) breaks after first opening and therefore ensures...
Compare -
The weight optimized 2-pcs screw closure, made of PP, is suitable for non-refillable (one-way) and refillable bottles with a 28mm BPF glass neck finish or PCO 1810 PET neck finish. The free rotation liner cares for good sealing. A molded tamper evidence band (double split...
Compare -
The 1-pc press-on hinge closure suits a 29/32 glass neck finish. The pourer is equipped with tear-off seal for reliable tamper evidence assuring the integrity of the product. After opening, the hinged lid can be opened up to 180 degrees and a non-drip pouring lip...
Compare -
The 1-pc press-on hinge closure suits a 29/32 glass neck finish. The pourer is equipped with tear-off seal for reliable tamper evidence assuring the integrity of the product. After opening, the hinged lid can be opened up to 180 degrees and a non-drip pouring lip...
Compare -
The 6-pcs non-refillable liquor closure fits onto a glass neck. It is of PP shell and an inner fitment made out of PP, PC, LDPE parts and a glass ball for efficient counterfeiting protection. The closure has three separate TE features, together with anti-refill protection.
Compare
