-
The closure fitting is suitable for tin plate container with a 24mm piercing. The base part is designed with a cylindrical insertion edge and is equipped with a tear-off seal granting a secure tamper evidence function. The screw cap is featured with a bore seal...
Compare -
The PP-made screw closure with hinged overcap is fitting on a 33-400 plastic container neck and offers a round pouring hole featured with a TPE valve for controlled and well dosed pouring. The valve can be offered in different shore hardness’s and cut sizes to...
Compare -
The 3 pieces closure fits to a 13mm PET neck. After unscrewing the round over cap the inside spout design allows a targeted filling of e-cigarettes. The closure is equipped with a tamper evident band protecting integrity of the product, as well it fulfils ISO8317...
Compare -
The 2-pcs closure fitment is suitable for beverage cartons with a 29mm pre-punched hole and will be weld-on before filling (pre-application). The fitment is equipped with 2 tamper evidence functions to protect the integrity of the filled product: the pourer is designed with a tear-off...
Compare -
The 1-pc press-on hinge closure suits a 29/21 PET neck or adaquate glass neck. The pourer is equipped with tear-off seal for reliable tamper evidence assuring the integrity of the product. After opening, the hinged lid can be opened up to 180 degrees and a...
Compare -
The 2-pcs press-on screw closure suits a 26/21 PET neck finish. The pourer is equipped with tear-off seal for reliable tamper evidence and a flow regulator for controlled pouring. A non-drip pouring lip avoids dripping of product after pouring. The screw closure is designed as...
Compare -
The 2-pc press-on closure suits a 29-28/21 glass neck finish. The pourer is equipped with tear-off seal for reliable tamper evidence assuring the integrity of the product. Furthermore a tear-off tamper band, which can be torn away from left and right side offere a second...
Compare -
The 2-pcs press-on screw closure suits a 29/21 PET neck finish. The pourer is equipped with tear-off seal for reliable tamper evidence and a newly designed flow regulator controls pouring: the 2-Flow closure, has an innovative oil flow control system, which allows less or more...
Compare -
The PP-made snap-on closure with hinged overcap is fitting on a 29/25 (29 snap-on) plastic container neck and offers a round pouring hole featured with a TPE valve for controlled and well dosed pouring. The valve can be offered in different shore hardness and cut...
Compare -
This press-on closure for 5 gallon water container, with bi- injected seal has a non-spill valve function.
Compare -
The weight optimized 2-pcs screw closure, made of PP, is suitable for non-refillable (one-way) and refillable bottles with a 28mm BPF glass neck finish or PCO 1810 PET neck finish. The free rotation liner cares for good sealing. A molded tamper evidence band (double split...
Compare -
The 1-pc BERICAP DoubleSeal screw closure with a 144 knurls design and equipped with an inner and outside sealing lip, provides a superior tight seal for 28mm PET one-way bottles with PCO 1810 neck. The folded slit band provides reliable tamper evidence, assures the integrity...
Compare -
The 1-pc BERICAP DoubleSeal SuperShorty screw closure with a 120 knurls design and equipped with an inner and outside sealing lip, provides a superior tight seal for 28mm PET one-way bottles with PCO 1881 neck. The slit flex band provide reliable tamper evidence, assures the...
Compare -
The Liquor closure is designed in 4 parts fitting to the GF-148 (British Glass) or adequate glass neckfinish design. Product integrity is secured by a specific tamper evidence feature designed with bridges. Furthermore a "Click Sound" indicates the opening of the closures before pouring. The...
Compare -
The Liquor closure designed in 4 parts, made of plastic with an outside aluminium shell, fitting the GF 148 (British Glass) or adequate glass neck finish designs. Product integrity is secured by a specific tamper evidence slit band designed with bridges. Furthermore a "Click Sound"...
Compare -
This sportscap is ideal for "on-the-go products" or during sports, as it can be opened just with one thumb. The 2-pieces closure made from PP and PE (insert) is suitable to PET bottles with 29mm neck finish. The overcap is secured with a tear-off tamper...
Compare -
The 2-pcs PE made push-on closure fits on a 29mm PET or glass neck finish. The pourer part is equipped a tear-off membrane to assure the integrity of the product. After opening the pouring will be controlled by a marguerite flow regulator. The non-drip function...
Compare -
The 1-pc BERICAP DoubleSeal screw closure, made of HDPE, and equipped with an inner and outside sealing lip, providing a superior tight seal for PET one-way bottles with 33mm 2-start neck finish. The slit flex band provide reliable tamper evidence, assures the integrity of the...
Compare -
The 1-pc DoubleSeal ClipAside Tethered Cap, PE made, with bore seal and an outer sealing lip, provides a tight seal for PET one-way bottles with PET 38 2-start (GME 30.29) neck finish. The ClipAside slit flexband provides 2 functions: a) product integrity: breaks reliably after...
Compare -
The 2-pcs Thumb'Up sports closure fits onto a 30/25 PET neck finish. The PE made pourer is equipped with a bore seal and a molded tamper evidence band is assuring the integrity of the product. The PP made overcap is secured with a tear-off tamper...
Compare -
The closure fitting is suitable for tin plate container with a 27mm piercing. The base part is designed with an cylindrical insertion edge and is equipped with a tear-off seal granting a secure tamper evidence function. The screw cap is featured with a bore seal...
Compare -
2-pcs 180° opening hinge closure (PP made) screwed on a pourer part (LDPE made), which fits to a 27mm piercing of a metal container. Transparent colours offer a superb appearance. The easy to open tear-off membrane secures the integrity of the product before the first...
Compare -
The closure fitting is suitable for tin plate container with a 24mm DIN piercing. The base part is designed with an universal insertion edge and the integrated pull-up spout is equipped with a tear-off seal granting a secure tamper evidence function. The attached overcap will...
Compare -
The 3-pcs screw cap consists of a the threaded closure plus an inserted tamper evidence band and a plug being the final closing part for the bottled product. The closure is suitable for 27 mm glass neck finish.
Compare -
The PP-made Push-on closure with hinged overcap, with an opening angle of 180 °, is fitting on a BPF 28 neck or 28 mm PET neck. The off-centred 5 mm pouring hole is designed with a specific pouring lip to avoid residual product , when...
Compare -
The one-piece hinge closure fits a PET bottle with PCO 1881 neck - it is pressed on-to the threaded PCO 1881 neck. Due to a non-slit interbead band the closure cannot be taken from the bottles without destroying it and furthermore a tear-off membrane secures...
Compare -
The screw closure is fitting onto a 31,5mm glass, PET or PE neck finish. The tamper evidence band breaks reliable after first opening. The closure is equipped with a EPE PVDC liner for safe sealing.
Compare -
The PP-made screw closure with hinged overcap is fitting on a 38-400 plastic container neck and offers a round 6 mm pouring hole for pouring. Various liner versions (Tri-Tap, Top-Tab, etc) are available for PET, HDPE or PP bottles.
Compare -
The PP-made screw closure with hinged overcap is fitting on a 33-400 plastic container neck and has a 6mm diameter pouring hole.
Compare -
The 2-pcs closure is fitting onto PET bottles with a 1-start 48mm neck finish. The lower pourer part is secured with a tamper evidence band and the upper spout part (water Tap) is secured with a tear-off band - both proving the integrity of the...
Compare -
The TAP BeriFlow 45 is a 3-pcs tap, made of PE, HDPE and LDPE parts, which can be screwed onto a blow molded container using a 45mm neck finish. The EPE washer grants safe tightness. The tab enables a fast and safe decanting of fluids...
Compare -
The TAP BeriFlow 55 is a 3-pcs tap, made of PE, HDPE and LDPE parts, which can be screwed onto a blow molded container using a 55mm neck finish. The EPE washer grants safe tightness. The tab enables a fast and safe decanting of fluids...
Compare -
The TAP BeriFlow 60 is a 3-pcs tap, made of PE, HDPE and LDPE parts, which can be screwed onto a blow molded container using a 60mm neck finish. The EPE washer grants safe tightness. The tab enables a fast and safe decanting of fluids...
Compare -
The 2-pcs closure fitment is pre-applied on beverage cartons with a 21mm orifice. The fitment is equipped with a spout and a screw cap, which provides a tamper evidence band, breaking with first opening of the package. Tight re-closability after first opening is assured by...
Compare -
The 3-pcs closure fitment is post-applied on beverage cartons with a 23mm pre-punched hole orifice. The fitment is equipped with a spout and a screw cap, which provides a tamper evidence band, breaking with first opening of the package. Tight re-closability after first opening is...
Compare
